Saw, Blades, Mills, Brochures. For Further Information. Machine Quote for Saws and Milling (847)-285-4800 ext 606. Specifications may change without notice at the sole discretion of Amada's Engineering Department. The HA400W automatic bandsaw from Amada is a production metal cutting bandsaw featuring: automatic operation, Hydraulic vises, easy to use controls and much more.
Productivity Features
Saw Head Frame
The rigid 'C' section frame carries the mountings for the two band wheels, heavy duty worm drive gear reducer, the band drive motor and saw guide arm mounting supports.
Band Wheels & Drive System
The band wheels are cast iron for long, productive life. The deflection free 9.4 inch (240 mm.) wheel hubs ensure the wheels run true regardless of tension stress or cutting loads. The spindle assemblies incorporate tapered roller bearings for greater rigidity and long service life. The drive motor is coupled to the transmission through a variable speed pulley.
Drive Wheel Transmission
The drive wheel transmission is designed and built by Amada to provide high efficiency speed reduction, which requires no external cooling, to deliver more power to the large diameter drive shaft. This shaft ensures that this developed torque is transferred to the blade with no strobing, enabling the machine to efficiently cut high alloys as well as free machining materials.
Pressure/Flow Feed Control
The independent pressure and flow controls in series ensure the optimum cutting rate can be obtained regardless of section or alloy being cut. The pressure control determines the cutting force applied to the blade and the flow control sets the maximum fall rate of the head. For example for difficult to machine materials the pressure is set higher than free machining alloys and the flow is set lower, as shown on the escutcheons above the above the control knobs.
Automatic, Powered Chip Conveyor
The hydraulically powered chip conveyor auger automatically removes the saw chips from the saw while draining the cutting fluid back into the fluid reservoir. The automatic chip conveyor greatly reduces cleanup time and enables the machine to run longer without operator cleanup.
Multiple Index
The machine control has the capability to make up to 9 index passes giving a maximum cut length of 141.7 in. (3,600 mm.) in automatic.
Machine Standard Features
- 9 Times Multi In
- Blade Brake Limit Switch
- Chip Conveyor
- Motion Detector
- Out of Material Switch
- Piece Counter
- Pressure Flow Valve
- Variable Blade Speed
Optional Accessories
- Return Conveyor, Manual
- Roller Table 6.5 ft
- Roller Table 10 ft
- Vertical Clamps
- Vise Pressure Control
Specifications may change without notice at the sole discretion of Amada's Engineering Department.
Amada Saw Manual Online
Capacity
| Cutting Capacity | Round (Diameter) | 1.18' - 16' | 30 - 420 mm |
|---|---|---|---|
| Rectangle (W x H) | 16' x 16' | 400 x 400 mm | |
| Work Load Capacity | 5511 lbs. | 2500 kg. | |
Blade and Vise Operation
| Saw Blade | Dimensions (L x T x W) | 15' x 0.050' x 1-1/2' | 4570 x 1.3 x 41 mm |
|---|---|---|---|
| Blade Speed | 50-295 ft./min, 60Hz Stepless | 15-90 m/min, 60Hz Stepless | |
| Tension Control | Hydraulic | ||
| Blade Control | Top Limit Setting | Automatic Setting with Quick Approach Feeder | |
| Cutting Control | Oil Pressure Flow Control Valve | ||
| Vise Operation | Type | Main and Rear Vise | |
| Control | Hydraulic Full-Stroke Cylinder | ||
Motors
| Motors | Saw Blade Motor | 7 HP | 5.5 kW |
|---|---|---|---|
| Hydraulic Pump Motor | 2 HP | 1.5 kW | |
| Cutting Fluid Pump Motor | 1/4 HP | 0.18 kW |
Power Requirements
| Power Requirements | Power Supply Voltage | AC220±10%, 3 PH, 60 Hz (Or AC440V, 3PH, 60Hz) |
|---|---|---|
| Power Requirement | 12.8 kVA |
Cutting Fluid and Hydraulic
Amada Saw Ha250w Parts Manual
| Cutting Fluid | Tank Capacity | 31.5 gal. | 120 Liters |
|---|---|---|---|
| Pump Type | Electric | ||
| Hydraulic | Tank Capacity | 10.5 gal. | 40 Liters |
| Pressure Setting | 498 psi | 3.5 MPa(35 kgf/cm² ) | |
Chip Disposal
| Chip Disposal | Chip Conveyor |
|---|
Material Index
| Material Index | Index Mechanism | Shuttle Vise | |
|---|---|---|---|
| Stroke | 19.6' (Maximum 9 times index) | 500 mm (Maximum 9 times index) | |
| Length | 0.394' - 177' | 10.0 - 4500 mm | |
| number of Input Stations | 1 | ||
| Number of Cut-Off Pieces | 1-9999 | ||
| Remnant Length | 3' | 76 mm | |
Dimensions and Weight
| Machine Dimensions (W x L x H) | Head Up Position | 95.5' x 106.3' x 95.5' | 2426 x 2701 x 2425 mm |
|---|---|---|---|
| Head Down Position | 90.0' x 106.3' x 62.4' | 2285 x 2701 x 1585 mm | |
| Table Height (Above Floor) | 31.5' | 800 mm | |
| Machine Weight | 4851 lbs. | 2200 kg. | |
HA400W Floor Plan PDF Donload[327KB]
Amada Saw Manual Free
Specifications may change without notice at the sole discretion of Amada's Engineering Department.
Amada Saw Parts Manual
Categories
- Saw Machines
- Milling
- Grinders